Spiderbond Adhesives Co., Limited
The Top Hot Melt Polyamide Adhesive Manufacturer in Asia

Products Category

Share to:

Low Melting Point Copolyester Hot Melt Adhesive Web 5206

Low melting point, anti-washing performance, VOC free adhesive
  • 5206
  • Spiderbond
  • 3506.9190
Availability:
Quantity:

Co-polyester Web Adhesive


Description

Spiderbond 5206 web adhesive is a nonwoven form hot melt adhesive produced based on co-polyester. Web adhesives handle like a fabric facilitating both intermittent and continuous processes. The CO-PES web is available in a range of basis weights from 6 grams to 60 grams per square meter.

5206 web adhesive is based upon high performance co-polyester polymer. This product offer good resistance to repeated home launderings, bond to a wide variety of textiles, foams, paper, leather, polymer materials, etc.


Advantages

Web pattern produces porous bonds.

VOC free adhesive in easy handle web form.

Strong bonding strength and good anti-washing performance.




Material properties:

Property

Detail or Method

Specification

Appearance

Bye eye

White web

Base


Co-polyester

Basis Weight   Range

g/m²

6-60, tolerance   ±10%

Width

cm

Max 155,   tolerance 0-20mm

Melting Range

DSC, °C

105-115

Melting Point

DSC, °C

100-110

Density


1.1-1.2

Washable   Temperature Resistance


60°C


Packaging:

5206 web adhesives are sold in roll form, pack in carton.

For further packaging details please contact our salesperson.




Shelf Life:  

5206 should be shipped and stored at temperatures below 50°C. 

The shelf life of 5206 is one year under these conditions.


Directions for Using:

5206 web can be activated with any of the following techniques: electric fusing press, heated rolls, heated air, radiant heat, or steam press. Dry heat activation recommend above 95°C.

Reactivation time is dependent upon technique, temperature, pressure, substrates, and adhesive thickness, but would typically be in a pressure of 1~3MPa to the adherend, andmaintain the pressure for 10~20 seconds to complete the bonding.

The surface of the adherend should be as clean and dry as possible, free of solvents and grease. Lower adherent surface temperatures or ambient temperatures will cause early adhesive coagulation, reducing open time and even causing adhesive shedding. Preheat the adherend if necessary.



Health & Safety Precautions

The Safety Data Sheet should be consulted for proper handling, clean up and spill containment before use. Keep containers covered to minimize contamination.

 
Our Service:
1. Samples send to you free of charge.
2. Delivery on time, quality according to customer request.
3. OEM, ODM is welcome.
4. Support small wholesale, retails, Any inquires will be replied within 24 hours. 

Previous: 
Next: 

CONTACT US

We are No.1 Polyamide Hot Melt Adhesives Manufacturer in Asia.

Products

Spiderbond News

Contact Info

 Tel: 0551-68160156
 E-mail:
info@spiderbond.com
 Phone: +86 15051463630

Subscribe

Be the first to know about our lastest products.


 2015 Spiderbond Adhesives Co., Limited All rights reserved.