Spiderbond Hot Melt Polyamide Adhesive For Shoes IndustrySPIDERBOND High Performance Hot Melt Polyamide Adhesive—Shoes Glue USUAGE: Suitable for the shoemaking industry! It can be used for the connection of various materials of shoe sole, heel, toe puff and various decorative accessories etc.SPIDERB

Reason 1: open time of the production line is too longSolution: shorten the production line’s open time or extend the open time of adhesiveReason 2: dosage of used adhesive is not enoughSolution:increase the dosage of using adhesiveReason 3: pressure force is weak or hold time is not enoughSolution:

Reason 1: nozzle has been blocked with carbide or other impuritySolution: clean the nozzle by using solvent,cleaning rod or On/Off switchReason 2: filter screen’s performance is not goodSolution: change the filter screenReason 3: control valve of the vent has been ruinedSolution: change the control

Reason 1: vents are dirtSolution: clean or change the ventsReason 2: vent’s control valve is ineffective,nozzle closure laxSolution: repair or change the nozzle/control valveReason 3: pressure is not enoughSolution: increase pressureReason 4: nozzle angle is not correctSolution: adjust the angle of

Reason 1: Viscosity of the adhesive is too highSolution: switch to low viscosity glueReason 2: gel temperature is too lowSolution: increase the gel temperatureReason 3: nozzle closure laxSolution: repair or change the nozzleReason 4: the nozzle is too far away from the substrate materialSolution: re