Spiderbond Adhesives Co., Limited
The Top Hot Melt Polyamide Adhesive Manufacturer in Asia

Why is there a bad adhesion during production of hot melt adhesives?

Views: 0     Author: Site Editor     Publish Time: 2019-09-02      Origin: Site

In the process of producing soluble PA adhesive, sometimes there is a phenomenon of poor bonding. Why? How can we solve it?

 

Reason

1. The operating temperature is low, causing the glue to solidify in advance.

2. The working temperature is low and the soluble polyamide adhesive is not completely melted.

3. The surface to be bonded is not in contact or the contact force is weak, and the surface of the polyamide adhesive granule is smooth.

4. The bond is easily separated. Usually because the adhesive is not properly selected.

 

Solution

1. Increase coating thickness or increase temperature.

2. Checking if the pressing is good, lower the operating temperature, or use a fast curing adhesive

3. keep enough pressure to the substrates until the liquid glue to solid.

 

Are you clear now? We hope this article can help you, if you still have doubts, please feel free to contact us, thank you for watching!


CONTACT US

We are No.1 Polyamide Hot Melt Adhesives Manufacturer in Asia.

Products

Spiderbond News

Contact Info

 Tel: 0551-68160156
 E-mail:
info@spiderbond.com
 Phone: +86 15051463630

Subscribe

Be the first to know about our lastest products.

 2015 Spiderbond Adhesives Co., Limited All rights reserved.